74 Micron 240m3/H Linear Motion Oil Drilling Mud Cleaner

Hunter 240 Drilling Mud Cleaner with Linear Motion Bottom Shaker

Hunter mud cleaner uses a two-stage separation process de-sander cone and de-silter cone for enhanced drilling fluid recovery. This design enables our mud cleaners to handle the entire circulating volume and remove any dry solids while retaining premium base fluid, which is vital to drilling success.

mud cleaner Hunter 240 is composed of 12pcs of 4" desilter cone and 2pcs of 10" desander cone. Treating capacity up to 240 cubic meters per hour. Cones on Hunter mud cleaner are all high-quality polyurethane. Such cones are durable and anti-corrosive, oil-resistant, high temperature-resistant. They are very suitable for the drilling fluids process. For some clients, they prefer flexible capacity adjustment during operation so we'll install ball valves on the cones inlet line.

Technical parameter of Hunter 240 drilling mud cleaner

How does drilling mud cleaner work?

Drilling mud is transferred to cones by a centrifugal pump from the shaker tank. Desander cone and desilter cone are fed by different pumps. This will provide better results. Under pump pressure, the fluids will run into cones and flow with centrifugal force. Then the heavy particles will deposit down and pushed out of cone drop in Apex.

After the mud cleaner processing, the solids larger than 15 microns will be separated out of drilling fluids. The drilling mud with solids sprays out of cones drop down to the bottom screen panel. Under vibration and filtration, the solids will be drier and save many fluids for a good drilling. The cleaned mud is transferred to centrifuge.

Spare parts of drilling mud cleaner

To know the mud cleaner parts well, we need to understand cleaner construction and main parts. Such as the desander cone, desilter cone, the bottom shaker, pipelines, pressure gauge. For the cones, there are hydrocyclone, coupling, drop in Apex, seal rubber, and so on

The bottom shaker, it is same as common shale shaker. Including the shaker basket, the shaker screen, the spring, the side rubber, channel protector, vibrator motor, the starter, and so on

Why select AIPU mud cleaner

AIPU is professional manufacturer on complete line solids control equipment. All wearing parts are high quality and universality assured. For the cones, all of them are made of high quality polyurethane. Fit with the Victaulic coupling.

Furthermore, AIPU is able to provide the interchangeable mud cleaner spare parts for other makes cleaner. The shaker screen produced by AIPU is API RP13C compliant. Our products and spare parts are highly appreciated by many clients

AIPU solids control always hold popular spare parts in stock for instant delivery. Cater for clients urgency, we promise 48 hours delivery to avoid any operation delay. We consider clients’ urgency so we get the preference so long time

For more information, please don't hesitate to contact AIPU solids control. You will get an optimal solution on mud conditioner or any other demand.

Linear Motion Drilling Mud Cleaner

240m3/H Drilling Mud Cleaner

74 Micron Drilling Mud Cleaner

74 Micron 240m3/H Linear Motion Oil Drilling Mud Cleaner Images