APMA Horizontal Mud Agitators With Worm Gear Driven By Electrical Motor Get High Comments From Customers
APMA series mud Agitator with worm gearbox is one of the most popular solids control equipment, due to low cost and durable performance. Mud Agitator with worm gearbox
In a complete mud system, how many sets of agitators do we need?
For oil and gas drilling, there are different configurations on tanks number, tanks size, so it's not easy to confirm. But we can take a system as an example. One mud system laying with 6 tanks, and tanks size are 9mX2.2mX2.3m. The normal proposal is 3 sets of agitator per tank. But there is a shaker tank, then we deduct 1 set. So, probably we need 17 sets of the agitator. And the agitators are APM7.5 driven by 7.5kw motor.
Is there any other configuration on the agitator type or drive system?
Yes. Some clients prefer the hydraulic drive for some specific use. Some clients prefer the stainless steel shaft and impeller. Different application and industry will request equipment much different If you have question or demand on mud mixers, please let us know and we'll help you to get the ideal solution
Moreover, the APMA series agitator is flexible on gearbox and motor configuration. Such as worm and worm wheel reducer, helical bevel reducer. The motor certified by IEC, ATEX, and so on
Please check below technical specifications for your reference. And some configuration is customizable. Please contact us for more details
You will get a free offer on an optimal solution, you will get a professional proposal very soon.
| Model | APMA5.5 | APMA7.5 | APMA11 | APMA15 |
| Motor | 7.5hp | 10hp | 15hp | 20hp |
| Impeller Speed | 60/70rpm or Customized |
| Single Impeller | 850mm | 950mm | 1050mm | 1200mm |
| Double Impeller | N/A | Up: 800 | Up: 850mm | Up: 950mm |
| Down: 800 | Down: 850mm | Down: 950mm |
| Ratio | 25.01:1 or Customized |
| Shaft Length | Depends on tank size |
| Power System | 380V/50Hz, 60Hz, 400V/50Hz, 60Hz, 415V/50Hz, 60Hz, 460V/50Hz, 60Hz, CUstomizable |
| Remark | Starter is optional |
Mud Agitator Direction
The agitator direction is not very strict because both direction is workable, the right direction is good agitating performance but heavier load and wrong direction will reduced load and agitating performance is not that good. The right direction is to press the mud downwards instead of upwards. While the mud goes down wards, the settled solids will be flushed up to keep a good agitating performance.
Electrical Standard for Mud Agitator
Explosion proof agitator is required for oil & gas drilling site, coal seam bethane drilling or mining. The Ex standard is different depending on different countries regulation and drilling site. Non explosion proof agitator is good for other drilling site like horizontal directional drilling, water well drilling, micro tunneling, pilling, etc. Ex standard is a customized part will be done as per buyer’s request.
Product Tags:
|
|
APMA API Standard Worm Gear Driven Horizontal Mud Agitators Images
|
